Digital spirit level ADXL345, TFT Display (HY1.8 SPI) and an Arduino simtronyx Das
system September 30, 2012, 10:50pm 6. SDA/SCK suggests I2C not SPI. The datasheet says 4-/3-wire spi, no mention of i2c. If it were truly i2c compliant, it would have used SCL / SDA. SDA can be used to mean serial data for spi. The datasheet you linked to has code to drive this lcd, written (poorly) for C51.
Графический дисплей HY1.8 SPI TFT v2
Netduino HY-1.8 SPI TFT Driver Netduino library for the HY 1.8 SPI TFT Display based on an older Adafruit ST7735 library. This display, which is extremely similar to the AdaFruit ST7735, is frequently found on ebay and is a great 1.8 inch SPI TFT display. I have pin out and wiring details in my blog post.
HYPlugins Releases FREE HYSEQ16 Sequencer VST Plugin Bedroom Producers Blog
In this case, we use a 1.8 inch TFT color display with 128×160 pixels (HY-1.8 SPI, the name on the board), equipped with an SPI interface, which gives us the opportunity compared to displays with parallel interface, to have more free ports for other applications available. A 1.8 inch TFT color display (HY-1.8 SPI) and an Arduino
TFT HY1.8 SPI pod Arduino YouTube
Mozz Re: ESP8266 + 1.8" TFT #21116 By Mario Mikočević - Sun Jun 21, 2015 5:35 pm Heya, after some reading managed to get it working, so for posterity here is documented pinout map -> Code: Select all /* * ESP8266-12 HY-1.8 SPI * GPIO5 Pin 06 (RESET) * GPIO2 Pin 07 (A0) * GPIO13 (HSPID) Pin 08 (SDA) * GPIO14 (HSPICLK) Pin 09 (SCK)
Hy YouTube
1 2 3 4 5 6 7 8 9 Share Save 414 views 8 years ago Short video clip played on a HY-1.8 SPI tft module. Video is playing at 15 fps but can play at much higher rate.
hy YouTube
Chinese module, HY-1.8 SPI TFT LCD Display library, modified library from Jonne Valola to work on the FRDM-KL25Z using 8 bit format.
ARDUINO и другое HY1.8 SPI (1.8 SPI TFT 128*160) ARDUINO
{"payload":{"allShortcutsEnabled":false,"fileTree":{"":{"items":[{"name":"HY18SPI.cs","path":"HY18SPI.cs","contentType":"file"},{"name":"LICENSE","path":"LICENSE.
Hy YouTube
1.8TFT SPI - ST7735 1.8" inch SPI TFT LCD Display Module 128x160 - $6. HY-TFT240 - ILI9325 2.4" inch TFT LCD Module 240x320 - $12 Twice the screen, twice the cost, twice the pins (at least) needed to drive it and a touch surface as well. A nice screen for larger projects, or where the screen is the project.
HY.0 HYPERGEN
Adafruit Industries, Unique & fun DIY electronics and kits 1.8 Color TFT LCD display with MicroSD Card Breakout [ST7735R] : ID 358 - This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller.
ARDUINO и другое HY1.8 SPI (1.8 SPI TFT 128*160) ARDUINO
In this example, we connect HY-1.8 SPI TFT display (160x128) to Neutis Developer board. We're going to use SPI0, PA9 and PA10 to control the display, but you can practice with SPI1 and other GPIO pins as well. Just make sure that overlay for SPI1 is enabled in your /boot/Env.txt and you're using the right pins.
Графический дисплей HY1.8 SPI TFT v2
This display, which is extremely similar to the AdaFruit ST7735, is frequently found on ebay and is a great 1.8 inch SPI TFT display. It also includes an SD Card slot, also available via SPI. The main issue with the display is the fact that the pin out marked on the PCB solder mask is completely wrong.
ARDUINO и другое HY1.8 SPI (1.8 SPI TFT 128*160) ARDUINO
1.8 inch TFT color display Resolution: 160×128 pixels, 262,144 colors SD card support SPI interface 3.3V or 5V (by soldering jumper, open 5V - bridged / closed 3.3 V) Arduino compatible Projects with the display: A 1.8 inch TFT color display (HY-1.8 SPI) and an Arduino Simple indoor climate monitoring with an Arduino, BMP085, DHT11 and a RTC
Hy YouTube
In this tutorial we use our Arduino to show an image slideshow on a 1.8 inch tft module with SD card support ( HY-1.8 SPI ). We will change the size and the format of the images and copy them to the SD card. After that the Arduino loads them from the card and shows them on the display.
Графический дисплей HY1.8 SPI TFT
Technical Details You may also be interested in the datasheet for the display , and display driver chip Product Dimensions: 46.6mm x 34.5mm x 2.4mm / 1.8" x 1.4" x 0.1" Learn Distributors 1.8" SPI TFT display, 160x128 18-bit color - ST7735R driver Product ID: 618 $9.95 In stock Order now to ship today Add to Cart Add to Wishlist Description
ARDUINO и другое HY1.8 SPI (1.8 SPI TFT 128*160) ARDUINO
1.8″ TFT LCD display on Raspberry Pi This project is now available for sale in the store I figured my cheap 1.8″ TFT display is useless on an Arduino as it pretty much eats the available memory (20K for simple sketches), so I decided to try it on my Raspberry Pi.
Hy YouTube
Today we build a spirit level with the help of the acceleration sensor ADXL345, an Arduino, a TFT-Display (HY-1.8 SPI) und some other parts. Digital spirit level: ADXL345, TFT (HY-1.8 SPI) and an Arduino Wiring: Zoom level: